Parts on group :
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 010. | K112211110 | [1] | ASSY,HST TRANSAXLE | 37.4000(lbs); 17.000 |
| 020. | K112281010 | [1] | HOUSING,LOWER | 4.5320(lbs); 2.060 |
| 030. | K112281020 | [1] | ASSY,UPPER HOUSING | 5.3680(lbs); 2.440 |
| 040. | K112281030 | [1] | SEAL-LIP | 0.0220(lbs); 0.010 |
| 050. | K112281040 | [1] | RING-WIRE RETAINING | 0.0022(lbs); 0.001 |
| 060. | K112281050 | [1] | RING-RETAINING | 0.0066(lbs); 0.003 |
| 070. | K112281060 | [1] | BEARING-SHAFT BALL | 0.1100(lbs); 0.050 |
| 080. | K112281070 | [2] | BEARING-CRADLE | 0.0264(lbs); 0.012 |
| 090. | K112281080 | [1] | BEARING-THRUST | 0.2200(lbs); 0.100 |
| 100. | K112281090 | [1] | SWASHPLATE-VARIABLE | 0.4620(lbs); 0.210 |
| 110. | K112281100 | [1] | ASSY BLOCK-CYLINDER | 1.2540(lbs); 0.570 |
| 120. | K112281110 | [1] | ARM-TRUNNION | 0.1100(lbs); 0.050 |
| 130. | K112281120 | [1] | GUIDE-SLOT | 0.0132(lbs); 0.006 |
| 140. | K112281130 | [1] | SHAFT-MOTOR | 1.2760(lbs); 0.580 |
| 150. | K112281140 | [1] | BEARING-THRUST | 0.4400(lbs); 0.200 |
| 160. | K112281150 | [1] | BLOCK-CYLINDER/MOTOR | 2.0460(lbs); 0.930 |
| 170. | K112281160 | [1] | SEAL-LIP | 0.0110(lbs); 0.005 |
| 180. | K112281170 | [1] | ACTUATOR-BYPASS | 0.0660(lbs); 0.030 |
| 190. | K112281180 | [1] | ASSY CENTER SECTION | 2.6400(lbs); 1.200 |
| 200. | K112281190 | [1] | SEAL-LIP | 0.0264(lbs); 0.012 |
| 210. | K112281200 | [1] | RING-RETAINING | 0.0022(lbs); 0.001 |
| 220. | K112281210 | [2] | WASHER | 0.0088(lbs); 0.004 |
| 230. | K113281220 | [1] | OIL FILTER ELEMENT | 0.1320(lbs); 0.060 |
| 240. | K112281230 | [1] | ARM-BYPASS | 0.0572(lbs); 0.026 |
| 250. | K112281240 | [1] | RING-RETAINING | 0.0022(lbs); 0.001 |
| 260. | K112281250 | [1] | ARM-ACTUATING | 0.1540(lbs); 0.070 |
| 270. | K112281260 | [2] | PIN-ACTUATING | 0.0264(lbs); 0.012 |
| 280. | K112281270 | [1] | BOLT | 0.0462(lbs); 0.021 |
| 290. | K112281510 | [1] | NUT,HEX | 0.0088(lbs); 0.004 |
| 300. | K112281290 | [4] | BRAKE ROTOR/STATOR K | 0.7920(lbs); 0.360 |
| 310. | K112281300 | [1] | WASHER | 0.0088(lbs); 0.004 |
| 320. | K112281310 | [1] | DIFFERENTIAL ASSY | 9.0200(lbs); 4.100 |
| 330. | K112281500 | [1] | SPRING,COMPRESSION | 0.0066(lbs); 0.003 |
| 340. | K112281330 | [2] | WASHER | 0.0132(lbs); 0.006 |
| 350. | K112281340 | [2] | SEAL | 0.0110(lbs); 0.005 |
| 360. | K112281350 | [1] | SHAFT-INPUT | 0.3938(lbs); 0.179 |
| 370. | K112281360 | [21] | BOLT | 0.0198(lbs); 0.009 |
| 380. | K112281370 | [2] | PIN | 0.0242(lbs); 0.011 |
| 390. | K112281380 | [1] | JACK SHAFT/PINION GE | 0.5060(lbs); 0.230 |
| 400. | K112281390 | [1] | JACK SHAFT | 0.1100(lbs); 0.050 |
| 410. | K112281400 | [2] | CAP SCREW | 0.0154(lbs); 0.007 |
| 420. | K112281410 | [2] | WASHER 7/16X1X.5 #50132 | 0.0066(lbs); 0.003 |
| 430. | K112281420 | [2] | BALL BEARING #44121 | 0.1320(lbs); 0.060 |
| 440. | K112281430 | [1] | SPRING,BLOCK | 0.0110(lbs); 0.005 |
| 450. | K112281440 | [1] | WASHER,BLOCK THRUST | 0.0044(lbs); 0.002 |
| 460. | K112281450 | [1] | CAP-VENT ASSEMBLY #70109 | 0.0088(lbs); 0.004 |
| 470. | K112281460 | [1] | ASSY FITTING-O RING | 0.0220(lbs); 0.010 |
| 480. | K112281470 | [1] | CASTLE NUT, 5/16-24 #44142 | 0.0176(lbs); 0.008 |
| 490. | K112281480 | [1] | COTTER PIN #44101 | 0.0022(lbs); 0.001 |
| 500. | K112281490 | [1] | SEAL-LIP | 0.0110(lbs); 0.005 |
